TTAF 019-2018 面向窄带物联网（NB-IoT）的终端模组功耗测试方法

ICS 33.050 M 30 面向窄带物联网（ NB-IoT）终端模组功耗测试方法 Specification for Power of Narrow Band Internet of Things (NB-IoT) Based Terminal and Module 2018- 06 - 19发布 2018 - 06 -19实施电信终端产业协会发布团体标准 T/TAF 019-2018 T/TAF 019-2018 I 目录目录 ................................ ................................ ............. I 前言 ................................ ................................ ........... III 面向窄带物联网（ NB-IoT）的终端模组功耗测试方法 ................................ ....... 1 1 范围 ................................ ................................ ............... 1 2 规范性引用文件 ................................ ................................ ..... 1 3 测试环境 ................................ ................................ ........... 1 4 通用工作状态测试方法 ................................ ............................... 1 4.1 关机状态功耗 ................................ ................................ ... 1 4.1.1 测试目的 ................................ ................................ ..... 1 4.1.2 测试环境 ................................ ................................ ..... 1 4.1.3 测试步骤 ................................ ................................ ..... 1 4.2 Idle 模式功耗 ................................ ................................ ... 1 4.2.1 测试目的 ................................ ................................ ..... 1 4.2.2 测试参数配置 ................................ ................................ . 2 4.2.3 测试环境 ................................ ................................ ..... 2 4.2.4 测试步骤 ................................ ................................ ..... 2 4.3 PSM模式功耗 ................................ ................................ .... 3 4.3.1 测试目的 ................................ ................................ ..... 3 4.3.2 测试参数配置 ................................ ................................ . 3 4.3.3 测试环境 ................................ ................................ ..... 4 4.3.4 测试步骤 ................................ ................................ ..... 4 4.4 single -tone模式控制面发送数据模式功耗 ................................ .......... 4 4.4.1 测试目的 ................................ ................................ ..... 4 4.4.2 测试参数配置 ................................ ................................ . 4 4.4.3 测试环境 ................................ ................................ ..... 5 4.4.4 测试步骤 ................................ ................................ ..... 5 4.5 single-tone模式控制面接收数据模式的功耗 ................................ ........ 5 4.5.1 测试目的 ................................ ................................ ..... 5 4.5.2 测试参数配置 ................................ ................................ . 5 4.5.3 测试环境 ................................ ................................ ..... 6 4.5.4 测试步骤 ................................ ................................ ..... 7 4.6 Multi -tone模式控制面发送数据模式功耗 ................................ ........... 7 4.6.1 测试目的 ................................ ................................ ..... 7 4.6.2 测试参数配置 ................................ ................................ . 7 4.6.3 测试环境 ................................ ................................ ..... 8 4.6.4 测试步骤 ................................ ................................ ..... 8 T/TAF 019-2018 II 4.7 Multi -tone模式控制面接收数据模式的功耗 ................................ ......... 8 4.7.1 测试目的 ................................ ................................ ..... 8 4.7.2 测试参数配置 ................................ ................................ . 8 4.7.3 测试环境 ................................ ................................ ..... 9 4.7.4 测试步骤 ................................ ................................ ..... 9 5 面向行业应用的典型工作状态测试方法 ................................ ................ 10 5.1 气表模型 ................................ ................................ ...... 10 5.1.1 测试目的 .........................